 |
Design Manual for Composite Decks, Form Decks and Roof Decks - No. 31November 2007 |
||
 |
Our latest Steel Deck Design Manual, Publication No. 31, includes the
NEW ANSI Approved Standards for Composite
Steel Floor Deck, Non-Composite Steel Floor
Deck, and Steel Roof Deck. This edition also provides our updated “Code of Standard Practice” and includes
contact information for our Members and
Associate Members. Other highlights of this manual
are current ASTM material designations,
information on cellular deck in non-electrified
applications, and guidelines for cellular deck floor
systems with electrical distribution. This manual is a "must have" for anyone who is responsible for specifying or designing with steel deck. |
||
|
Roof Deck Construction Handbook - No. RDCH1 November 2000 |
||
|
Contains information on roof construction with standard steel deck. Design examples for uplift loading are presented along with fastener capabilities. |
||
|
Diaphragm Design Manual Third Edition - No. DDMO3 September 2004 |
||
|
The Third Edition, DDMO3, of the SDI Diaphragm Design Manual continues the evolution of building shear resistance presented in the First and Second Editions of this manual. The manual is based on research, testing and analysis sponsored by the Steel Deck Institute and its member and associate member companies, under the direction of Dr. Larry D. Luttrell, Technical Advisor to the SDI, since 1965.
The Third Edition is based on the 2004 Supplement of the 2001 North American Specification for the Design of Cold-Formed Steel Structural Members. The manual explains the method developed to calculate the capacity of diaphragms using steel roof decks or composite steel floor decks and the use of the diaphragm load tables.
The diaphragm tables have been revised and adapted for ease of use with either the allowable stress design (ASD) or load and resistance factor design (LRFD) methods according to the North American Specification for the Design of Cold-Formed Steel Structural Members. With over 130 pages of diaphragm load tables using welds, screws and other mechanical fasteners, the manual is a comprehensive resource for the design profession. There are 16 example problems for ASD and LRFD design and equations to check fasteners for the combined effect of shear and tension.
|
||
 |
SDI Manual of Construction with Steel Deck - No. MOC2 - (2960KB) August 2006 |
||
|
Second edition - 2006 - Easy to read and follow. This publication reviews good practice in Steel Deck Construction and serves as a safety primer for Contractors, Erectors, Architects, Engineers and Inspectors who are responsible for safe and proper field installation of steel deck.
|
||
|
Composite Steel Deck Design Handbook - No. CDD2 March 1997 |
||
|
Standard properties tables for 1.5", 2", 3" composite deck with normal and light weight concrete - with or without beam studs - example problems covering concentrated loads.
|
||
|
Standard Practice Details - No. SPD2 May 2001 |
||
|
This publication provides valuable information for Composite, Non-Composite and Roof Decks; Beam Details; Pour Stop Table; Girder Closures; Stud Locations;
Stud Connector Table; Notes - Studs on Beams and Girders; Details for Steel Form Decks; Attachment Patterns; Construction Details for Roof Decks; Roof Deck
Accessories. NEW for SPD2 are guidelines for Deck Bundling and Sequencing. VERY USABLE AND PRACTICAL.
|
|
Copyright © 2002 Steel Deck Institute, All rights reserved. |
Steel Deck Institute
BACK TO TOP | 
BACK TO PUBLICATIONS
P.O. Box 25
Fox River Grove, IL 60021
phone: 847-458-4647
fax: 847-458-4648
email: steve@sdi.org
www.sdi.org